✅🔥 XADO Revitalizant EX120 for diesel engines

Description

Revitalizant EX120 - an improved formula of the classic revitalizer XADO.
Revitalizing Extreme Action has an active substance concentration of 120%, more actively restores and protects the engine directly during vehicle operation.
Available in more convenient packaging.
Revitalizant EX120 forms a strong protective metal-ceramic coating on the friction surfaces of
parts.
The effect begins immediately after application.
Positive changes in the engine, associated with its rejuvenation, can be expected for several tens of kilometers.
Detailed characteristics:
Application
Processing of the engine is carried out in three stages:
Stage 1: make the contents of the syringe into the oil filler hole of the engine warmed up to operating temperature.
Start the engine and let it idle for 5-10 minutes.
2nd stage: carried out in the same order after 100-250 km.
3rd stage: carried out in the same order after 100-250 km.
Processing is considered to be completed after at least 1500 km.
Notes
It is not recommended to change the oil before the end
Idling is possible (4 hours - equivalent to 200 km)
New engines with a mileage of up to 20,000 km can be processed in one go
Engines after overhaul are recommended to be processed in the usual way in three stages
Protective metal-ceramic coating is formed on any working mechanism.
However, if the mechanism (engine) is in critical condition (100% operation), it is necessary to replace the destroyed parts.
The protective coating is active for 60,000 km, after which re-treatment is recommended.
Dosage:
The volume of the oil system, l.
3-10
11-20
21-30
Number of syringes (8 ml), pcs.
3
6
9
The scheme of processing in stages
1 + 1 + 1
2 + 2 + 2
3 + 3 + 3
Number of syringes for new engines
2
4
6
Features:
After processing, your car is under XADO superprotection.
During engine operation, the parts of the cylinder-piston group in the area of ​​the upper "dead" point, the gas distribution mechanism (cam, pusher), crankshaft and camshaft sliding bearings are most prone to operation.
Revitalizant contains a building material that compensates for the operation of these parts.
As a result of revitalization on the surfaces of friction pairs a new multifunctional gradient coating is formed with a set of necessary performance characteristics and stress states.
Engine parts are increased in volume, return the same "hundreds" and "tens" that were lost, triggered during operation.
This is the effect of repair.
The resulting coating has unique properties: high strength, high corrosion resistance, low roughness.
After revitalization, engine parts are guaranteed to last 2-4 times longer.
As a result of revitalization of the engine the compression in cylinders considerably increases and equalizes, fuel consumption is reduced, intake and rolling of the car increases, oil pumps, units of turbocharging, shafts and inserts (bearings), mirrors of cylinders are restored, ellipseness is eliminated.
The engine runs quietly and without vibration.
Thanks to revitalization, it can always be maintained in perfect condition.